View IRF6614PBF_7934958.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

www.irf.com 1 5/5/06 directfet power mosfet directfet isometric fig 1. typical on-resistance vs. gate voltage

applicable directfet outline and substrate outline (see p.7,8 for details) sq sx st mq mx mt description the IRF6614PBF combines the latest hexfet? power mosfet silicon technology with the advanced directfet tm packaging to achieve the lowest on-state resistance in a package that has the footprint of a micro-8 and only 0.7 mm profile. the directfet package is compatible with existing layout geometries used in power applications, pcb assembly equipment and vapor phase, infra - red or convection soldering techniques, when application note an-1035 is followed regarding the manufacturing methods and pro- cesses. the directfet package allows dual sided cooling to maximize thermal transfer in power systems, improving previous best thermal resistance by 80%. the IRF6614PBF balances both low resistance and low charge along with ultra low package inductance to reduce both conduction and switching losses. the reduced total losses make this product ideal for high efficiency dc-dc converters that power the late st generation of processors operating at higher frequencies. the IRF6614PBF has been optimized for parameters that are critical i n synchronous buck operating from 12 volt bus converters including rds(on) and gate charge to minimize losses in the control fet socke t. 2.0 4.0 6.0 8.0 10.0 v gs , gate-to-source voltage (v) 4 8 12 16 20 t y p i c a l r d s ( o n ) ( m ? ) t j = 25c t j = 125c i d = 12.7a 0 1020304050 q g total gate charge (nc) 0 2 4 6 8 10 12 v g s , g a t e - t o - s o u r c e v o l t a g e ( v ) v ds = 32v vds= 20v i d = 10.2a v dss v gs r ds(on) r ds(on) 40v max 20v max 5.9m ? @ 10v 7.1m ? @ 4.5v fig 2. typical total gate charge vs gate-to-source voltage q g tot q gd q gs2 q rr q oss v gs(th) 19nc 6.0nc 1.4nc 5.5nc 9.5nc 1.8v click on this section to link to the appropriate technical paper. click on this section to link to the directfet website. surface mounted on 1 in. square cu board, steady state. t c measured with thermocouple mounted to top (drain) of part. repetitive rating; pulse width limited by max. junction temperature. starting t j = 25c, l = 0.43mh, r g = 25 ? , i as = 10.2a. absolute maximum ratin g s parameter units v ds drain-to-source voltage v v gs gate-to-source voltage i d @ t a = 25c continuous drain current, v gs @ 10v i d @ t a = 70c continuous drain current, v gs @ 10v a i d @ t c = 25c continuous drain current, v gs @ 10v i dm pulsed drain current e as single pulse avalanche energy mj i ar avalanche current a 10.2 max. 10.1 55 102 20 40 12.7 22 IRF6614PBF irf6614trpbf rohs compliant lead-free (qualified up to 260c reflow) application specific mosfets ideal for cpu core dc-dc converters low conduction losses and switching losses low profile (<0.7mm) dual sided cooling compatible compatible with existing surface mount techniques
2 www.irf.com repetitive rating; pulse width limited by max. junction temperature. pulse width 400s; duty cycle 2%. static @ t j = 25c (unless otherwise specified) parameter min. typ. max. units bv dss drain-to-source breakdown voltage 40 ??? ??? v ? v dss / ? t j breakdown voltage temp. coefficient ??? 38 ??? mv/c r ds(on) static drain-to-source on-resistance ??? 5.9 8.3 m ? ??? 7.1 9.9 v gs(th) gate threshold voltage 1.35 1.80 2.25 v ? v gs(th) / ? t j gate threshold voltage coefficient ??? -5.5 ??? mv/c i dss drain-to-source leakage current ??? ??? 1.0 a ??? ??? 150 i gss gate-to-source forward leakage ??? ??? 100 na gate-to-source reverse leakage ??? ??? -100 gfs forward transconductance 71 ??? ??? s q g total gate charge ??? 19 29 q gs1 pre-vth gate-to-source charge ??? 5.9 ??? q gs2 post-vth gate-to-source charge ??? 1.4 ??? nc q gd gate-to-drain charge ??? 6.0 ??? q godr gate charge overdrive ??? 5.7 ??? see fig. 15 q sw switch charge (q gs2 + q gd ) ??? 7.4 ??? q oss output charge ??? 9.5 ??? nc r g gate resistance ??? 1.0 1.5 ? t d(on) turn-on delay time ??? 13 ??? t r rise time ??? 27 ??? t d(off) turn-off delay time ??? 18 ??? ns t f fall time ??? 3.6 ??? c iss input capacitance ??? 2560 ??? c oss output capacitance ??? 370 ??? pf c rss reverse transfer capacitance ??? 200 ??? diode characteristics parameter min. typ. max. units i s continuous source current ??? ??? 53 (body diode) a i sm pulsed source current ??? ??? 102 (body diode) v sd diode forward voltage ??? ??? 1.0 v t rr reverse recovery time ??? 15 23 ns q rr reverse recovery charge ??? 5.5 8.3 nc v ds = 32v, v gs = 0v, t j = 125c v gs = 20v v gs = -20v v gs = 4.5v i d = 10.2a v gs = 0v v ds = 20v i d = 10.2a t j = 25c, i f = 10.2a di/dt = 100a/s
t j = 25c, i s = 10.2a, v gs = 0v
showing the integral reverse p-n junction diode. conditions v gs = 0v, i d = 250a reference to 25c, i d = 1ma v gs = 10v, i d = 12.7a
v gs = 4.5v, i d = 10.2a
v ds = v gs , i d = 250a v ds = 32v, v gs = 0v mosfet symbol clamped inductive load v ds = 10v, i d = 10.2a conditions ? = 1.0mhz v ds = 16v, v gs = 0v v dd = 20v, v gs = 4.5v
v ds = 20v
www.irf.com 3 fig 3. maximum effective transient thermal impedance, junction-to-ambient 1e-006 1e-005 0.0001 0.001 0.01 0.1 1 10 100 t 1 , rectangular pulse duration (sec) 0.001 0.01 0.1 1 10 100 t h e r m a l r e s p o n s e ( z t h j a ) 0.20 0.10 d = 0.50 0.02 0.01 0.05 single pulse ( thermal response ) notes: 1. duty factor d = t1/t2 2. peak tj = p dm x zthja + tc ri (c/w) i (sec) 0.6676 0.000066 1.0462 0.000896 1.5611 0.004386 29.282 0.68618 25.455 32 j j 1 1 2 2 3 3 r 1 r 1 r 2 r 2 r 3 r 3 ci= i / ri ci= i / ri c 4 4 r 4 r 4 5 5 r 5 r 5 surface mounted on 1 in. square cu board, steady state. t c measured with thermocouple incontact with top (drain) of part. used double sided cooling, mounting pad with large heatsink. mounted on minimum footprint full size board with metalized back and with small clip heatsink. r is measured at
surface mounted on 1 in. square cu board (still air).
with small clip heatsink (still air) mounted on minimum footprint full size board with metalized back and with small clip heatsink (still air) absolute maximum ratin g s parameter units p d @t a = 25c power dissipation w p d @t a = 70c power dissipation p d @t c = 25c power dissipation t p peak soldering temperature c t j operating junction and t stg storage temperature range thermal resistance parameter typ. max. units r ja junction-to-ambient ??? 58 r ja junction-to-ambient 12.5 ??? r ja junction-to-ambient 20 ??? c/w r jc junction-to-case ??? 3.0 r j-pcb junction-to-pcb mounted 1.0 ??? linear derating factor w/c 0.017 270 -40 to + 150 max. 42 2.1 1.4
4 www.irf.com fig 5. typical output characteristics fig 4. typical output characteristics fig 6. typical transfer characteristics fig 7. normalized on-resistance vs. temperature fig 8. typical capacitance vs.drain-to-source voltage fig 9. typical on-resistance vs. drain current and gate voltage 0.1 1 10 100 v ds , drain-to-source voltage (v) 0.01 0.1 1 10 100 1000 i d , d r a i n - t o - s o u r c e c u r r e n t ( a ) 60s pulse width tj = 25c 2.3v vgs top 10v 5.0v 4.5v 4.0v 3.5v 3.0v 2.5v bottom 2.3v 0.1 1 10 100 v ds , drain-to-source voltage (v) 1 10 100 1000 i d , d r a i n - t o - s o u r c e c u r r e n t ( a ) 60s pulse width tj = 150c 2.3v vgs top 10v 5.0v 4.5v 4.0v 3.5v 3.0v 2.5v bottom 2.3v 1.5 2.0 2.5 3.0 3.5 4.0 v gs , gate-to-source voltage (v) 0.1 1.0 10.0 100.0 i d , d r a i n - t o - s o u r c e c u r r e n t ( ) v ds = 15v 60s pulse width t j = 150c t j = 25c t j = -40c -60 -40 -20 0 20 40 60 80 100 120 140 160 t j , junction temperature (c) 0.5 1.0 1.5 2.0 t y p i c a l r d s ( o n ) ( n o r m a l i z e d ) i d = 12.7a v gs = 10v 1 10 100 v ds , drain-to-source voltage (v) 0 1000 2000 3000 4000 c , c a p a c i t a n c e ( p f ) coss crss ciss v gs = 0v, f = 1 mhz c iss = c gs + c gd , c ds shorted c rss = c gd c oss = c ds + c gd 0 20 40 60 80 i d , drain current (a) 5 10 15 20 25 30 t y p i c a l r d s ( o n ) ( m ? ) t a = 25c v gs = 3.0v v gs = 3.5v v gs = 4.0v v gs = 4.5v v gs = 5.0v v gs = 10v
www.irf.com 5 fig 12. maximum drain current vs. case temperature fig 10. typical source-drain diode forward voltage fig11. maximum safe operating area fig 14. maximum avalanche energy vs. drain current 25 50 75 100 125 150 t j , junction temperature (c) 0 10 20 30 40 50 60 i d , d r a i n c u r r e n t ( a ) 0.2 0.6 1.0 1.4 1.8 2.2 v sd , source-to-drain voltage (v) 0.1 1.0 10.0 100.0 i sd , reverse drain current (a) v gs = 0v t j = 150c t j = 25c t j = -40c 25 50 75 100 125 150 starting t j , junction temperature (c) 0 20 40 60 80 100 e a s , s i n g l e p u l s e a v a l a n c h e e n e r g y ( m j ) i d top 4.3a 6.4a bottom 10.2a 0.01 0.10 1.00 10.00 100.00 v ds , drain-tosource voltage (v) 0.1 1 10 100 1000 i d , d r a i n - t o - s o u r c e c u r r e n t ( a ) tc = 25c tj = 175c single pulse 1msec 10msec operation in this area limited by r ds (on) 100sec dc -75 -50 -25 0 25 50 75 100 125 150 t j , temperature ( c ) 0.5 1.0 1.5 2.0 2.5 v g s ( t h ) g a t e t h r e s h o l d v o l t a g e ( v ) i d = 250a fig 13. typical threshold voltage vs. junction temperature
6 www.irf.com fig 15a. gate charge test circuit fig 15b. gate charge waveform vds vgs id vgs(th) qgs1 qgs2 qgd qgodr fig 16c. unclamped inductive waveforms t p v (br)dss i as fig 16b. unclamped inductive test circuit fig 17b. switching time waveforms v gs v ds 90% 10% t d(on) t d(off) t r t f fig 17a. switching time test circuit v gs pulse width < 1s duty factor < 0.1% v dd v ds l d d.u.t + - r g i as 0.01 ? t p d.u.t l v ds + - v dd driver a 15v 20v 1k vcc dut 0 l
www.irf.com 7 directfet substrate and pcb layout, st outline (small size can, t-designation). please see directfet application note an-1035 for all details regarding the assembly of directfet. this includes all recommendations for stencil and substrate designs. fig 18.
for n-channel hexfet power mosfets p.w. period di/dt diode recovery dv/dt ripple 5% body diode forward drop re-applied voltage reverse recovery current body diode forward current v gs =10v v dd i sd driver gate drive d.u.t. i sd waveform d.u.t. v ds waveform inductor curent d = p. w . period

?
?
?

?

? !"#"" ?

$
%% ? "#""& # + - + + + - - -
g = gate d = drain s = source d d d d g s s
8 www.irf.com directfet outline dimension, st outline (small size can, t-designation). please see directfet application note an-1035 for all details regarding the assembly of directfet. this includes all recommendations for stencil and substrate designs. directfet part marking code a b c d e f g h j k l m r p imperial min 4.75 3.70 2.75 0.35 0.58 0.58 0.75 0.53 0.26 0.88 2.18 0.616 0.020 0.08 max 4.85 3.95 2.85 0.45 0.62 0.62 0.79 0.57 0.30 0.98 2.28 0.676 0.080 0.17 min 0.187 0.146 0.108 0.014 0.023 0.023 0.030 0.021 0.010 0.035 0.086 0.0235 0.0008 0.003 metric dimensions max 0.191 0.156 0.112 0.018 0.024 0.024 0.031 0.022 0.012 0.039 0.090 0.0274 0.0031 0.007
www.irf.com 9 directfet tape & reel dimension (showing component orientation). data and specifications subject to change without notice. this product has been designed and qualified for the consumer market. qualification standards can be found on ir?s web site. ir world headquarters: 233 kansas st., el segundo, california 90245, usa tel: (310) 252-7105 tac fax: (310) 252-7903 visit us at www.irf.com for sales contact information . 05/06 code a b c d e f g h max 0.319 0.161 0.484 0.219 0.165 0.205 n.c 0.063 min 0.311 0.154 0.469 0.215 0.158 0.197 0.059 0.059 max 8.10 4.10 12.30 5.55 4.20 5.20 n.c 1.60 dimensions metric imperial loaded tape feed direction min 7.90 3.90 11.90 5.45 4.00 5.00 1.50 1.50 standard option (qty 4800) min 330.0 20.2 12.8 1.5 100.0 n.c 12.4 11.9 code a b c d e f g h max n.c n.c 13.2 n.c n.c 18.4 14.4 15.4 min 12.992 0.795 0.504 0.059 3.937 n.c 0.488 0.469 max n.c n.c 0.520 n.c n.c 0.724 0.567 0.606 metric imperial tr1 option (qty 1000) imperial min 6.9 0.75 0.53 0.059 2.31 n.c 0.47 0.47 max n.c n.c 12.8 n.c n.c 13.50 12.01 12.01 min 177.77 19.06 13.5 1.5 58.72 n.c 11.9 11.9 metric max n.c n.c 0.50 n.c n.c 0.53 n.c n.c reel dimensions note: controlling dimensions in mm std reel quantity is 4800 parts. (ordered as irf6614trpbf). for 1000 parts on 7" reel, order irf6614tr1pbf
note: for the most current drawings please refer to the ir website at: http://www.irf.com/package/

▲Up To Search▲

Price & Availability of IRF6614PBF

	To Download IRF6614PBF Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .